Maintenance And Troubleshooting; Cleaning; Maintenance - Hallins Temptainer Basic Series User Manual

6. MAINTENANCE AND TROUBLESHOOTING

This chapter describes the maintenance required for the trolley to function in the best way
possible as well as troubleshooting for rectification by the user.
In addition to this manual, it is possible that we may send separate instructions that
accompany the trolley in terms of maintenance and troubleshooting.
NOTE!
Only Hallins original spare parts may be used when replacing parts. Failure to observe this
may nullify the warranty obligation in full.

CLEANING

IMPORTANT
Under no circumstances may the Temptainer Basic be connected to the mains
supply during cleaning. Always remove the mains cable from the electrical
socket before cleaning.
As the Temptainer Basic contains electrical components, it is very important that cleaning is
carried out with care.
The Temptainer Basic may be cleaned using standard detergents used in restaurants and
catering operations.
NOTE!
Corrosive detergents may not be used.

MAINTENANCE

In order for your Temptainer Basic to work in the best possible way, it is important to perform
regular maintenance in accordance with the following.
IMPORTANT
Check that the trolley is not connected to the mains when commencing
maintenance.
Frequency
Each day
Every month
Procedure
1. Clean the trolley in accordance with cleaning instructions.
2. Check that the trolley's electrical components and flex
holder are free from defect.
3. Check that signs and marks are intact and legible.
1. Check all electrical connections and components and
rectify any damage and wear. Replace with new parts
where necessary.
11