Advertisement
Installations
DIN Rail Install
The box comes with hardware to mount the surge protector to a DIN rail. Below are the components that will be needed for
this install.
Directions
1. Using a Phillips head screwdriver, attach the Green DIN Rail Clip (Part 2) to the Black DIN Rail Attachment Bar (Part 4)
using the two DIN Rail Clip Screws (Part 3).
The facts and figures herein are carefully compiled to the best of our knowledge and are intended for general informational purposes only. Responsibility
for the use and application of AccelTex Solutions materials rests with the end user. All AccelTex Solutions products are sold pursuant to the AccelTex
Solutions Terms and Conditions of Sale. © 2018 AccelTex Solutions. All Rights Reserved. AccelTex, AccelTex Solutions, the AccelTex Solutions Logo and
other marks are trademarks or registered trademarks of AccelTex Solutions.
ETHERNET SURGE SUPPRESSOR GUIDE
2
Figure 1 - Parts Required for DIN Rail Install
3
Side View
Figure 2 - DIN Rail Clip to DIN Rail Attachment Bar
ATS-SS-70V-5KA-1GBPS-AT
5
3
4
Front View
3
1
Back View
1.888.406.8906
SALES@ACCELTEX.COM
Advertisement
