Related Manuals for Galiso LDD-4
Summary of Contents for Galiso LDD-4
- Page 1 LDD-4 GALISO LIGHT DUTY DRYER INSTALLATION/OPERATION INSTRUCTION MANUAL MANUAL NUMBER 21-11-1027 Issued July 2018 Copyright 2018, Galiso, Inc. 22 Ponderosa Ct., Montrose, CO 81401 (970) 249-0233 (800) 854-3789 www.galiso.com...
- Page 2 !!!DANGER!!! DO NOT USE THIS EQUIPMENT TO PURGE TOXIC OR FLAMMABLE GAS DO NOT USE THIS EQUIPMENT UNDER FLAMMABLE, VOLATILE OR TOXIC ENVIRONMENTAL CONDITIONS...
-
Page 3: Table Of Contents
7.1 Spare Parts – 220Volt ............5-2 List of Tables and Figures Number/Title Page Figure 1, LDD-4 Galiso Cylinder Dryer ..........2-1 Figure 2, Spare Parts Components, 110 Volt ........5-1 Figure 3, Spare Parts Components, 220 Volt ........5-2 ... -
Page 4: Introduction
1.0 INTRODUCTION The LDD-4 Galiso Light Duty Dryer has been designed to quickly dry up to four drained cylinders in a matter of minutes. The LDD-4 Cylinder Dryer features a heavy duty blower and can generate 95 CFM of hot or cold air. The built in Dryer motor is quiet, and can produce temperatures up to 175°F to accelerate the drying of steel and aluminum cylinders. -
Page 5: Specifications
Blower Motor: generates 95 CFM of hot or cold air. Dimensions (frame and blower assembly): 59x20x72 Capacity: up to 4 – 60” tall. Decibels: from 5 dB to 75.7dB Warranty: One Year (see Galiso Warranty Terms, Form No GSO7805-1). Section 2 - 1 21-11-1027... -
Page 6: Safety
A. Take care to keep the work area around the LDD-4 clean, dry and free of debris. This will decrease the chance of operator injury due to slips or falls. -
Page 7: Operation
5.0 OPERATION A. Galiso, Inc. recommends a warm up time of approximately 2 minutes at the start- up of the machine. Switch the Power Switch to the HEAT position. After the warm up, the Power Switch can remain in the HEAT position, or be switched to COOL or OFF B. -
Page 8: Spare Parts - 110Volt
7.0 SPARE PARTS – 110 Volt The LDD-4 has been designed with modular components for ease of replacing parts if necessary. See Figure 2 or 3 (dependent on the voltage of your machine), Replacement Components. 25-41-3191 Electrical Enclosure Assembly 88-11-0054... -
Page 9: Spare Parts - 220Volt
7.1 SPARE PARTS – 220 Volt The LDD-4 has been designed with modular components for ease of replacing parts if necessary. See Figure 2 or 3 (dependent on the voltage of your machine and code requirements), Replacement Components: Electrical 25-41-3196 B. - Page 10 Galiso. In the event of replacements, the replacement unit will continue under the original equipment warranty or carry a 90-day warranty, whichever is longer. No charge will be made for warranty repairs, and/or replacements.