Operation - Craftsman 172.797740 Operator's Manual

MAINTENANCE
WARNING:
This hedge trimmer should NEVER be connected to the
!
power source when you are assembling parts, making adjustments, oiling
blades, cleaning or when it is not in use. Disconnecting the trimmer will prevent
accidental starting, which could cause serious personal injury,
CLEANING
Disconnect from electrical outlet. Using a soft brush, remove debris from all air intakes
and cutting blade.
Wipe plastic surfaces of hedge trimmer clean with a soft dry cloth.
WARNING:
! Never use water for cleaning your Hedge trimmer.
Do not clean with chemicals, including petrol, or solvents as this can
damage your hedge trimmer.
LUBRICATING THE CUTTING BLADE
(Fig. 8)
For easier operation and longer life,
lubricate the cutting blades before
and after each use.
Before lubricating, make sure the
Oil along edge
Hedge trimmer is disconnected from
of Blade
electrical outlet. Support Bar
Apply the oil so that it runs between
the two blades. (See Fig. 8)
Stop, disconnect and oil hedge
trimmer occasionally during extended
use.
AT THE END OF THE CUTTING SEASON
Clean the Hedge trimmer thoroughly. Check that all nuts and bolts are secure.
Visually inspect the Hedge trimmer for any worn or damaged parts.
TO STORE YOUR HEDGE TRIMMER
Store the hedge trimmer in a secure,
dry place out of the reach of children. Hanging slot
for storing
Do not place other objects on top of the hedge
trimmer.
The trimmer is provided with 1 hanging slot
for storing the trimmer on the wall (See Fig. 9).
Store in a dry place where the trimmer
can be protected from damage.
16
MAINTENANCE
ACCESSORIES ACCESSORIES
CAUTION:
! There are NO accessories designed for use on this hedge trimmer.
WARNING:
The use of attachments or accessories that are not
!
recommended for this tool might be dangerous and could result in serious injury.
Fig. 8
Fig. 9
17