Craftsman 172.797740 Operator's Manual page 6

DESCRIPTION
KNOW YOUR ELECTRIC HEDGE TRIMMER
This hedge trimmer has many built-in convenience features for fast, efficient and safe cutting.
These features include the front full wrap assist handle, and lock-off button and trigger safety
switch located under the rear handle to prevent accidental starts. Both button and trigger switch
must be pressed to turn the hedge trimmer on.
This hedge trimmer has a precision built electric motor and it should only be connected
to a 120-volt, 60 Hz AC ONLY power supply (normal household current). The trimmer
should always be used with a GFCI (Ground Fault Circuit Interrupter) outlet.
DO NOT operate this trimmer on direct current (DC). The large voltage drop would
cause a loss of power and the motor would overheat. If the trimmer does not operate
when plugged into correct 120-volt, 60 Hz AC ONLY outlet, check the power supply.
The trimmer comes with a 12-in. pigtail power cord and must be plugged into a proper
extension cord.
This Electric Hedge Trimmer Has the Following Features:
1. 4.2 Amp Motor provides the power to cut branches up to 5 /8-inch in diameter.
2. 1800 SPM-Strokes per minute (no-load speed) for fast cutting on a variety of hedge
trimming jobs around the yard.
3. 20-inch long Steel Cutting Blade provides durability and extended cutting reach.
4. Dual Cutting Action helps minimize vibration to reduce operator fatigue and provides
a fast cutting action
5. Hardened Steel Blades stay sharp longer.
7. Front Full Wrap Assist Handle for maximum handling control
8. Rear Handle for easy control in all angles of use
9. Cord Retainer located on rear handle, keeps pigtail and extension cord connected
10. Lightweight Ergonomically Designed for easy use and handling comfort
DANGER:
Laceration Hazard. Keep hands away from blades. Handle
!
blades with care. Keep both hands on handles when power is on.
SPECIFICATIONS
Blade Length 20-inches
Speed (Strokes per Minute) 1800
Cutting Capacity 5/8-inch
Cutting Action Dual
Power Requirement 120-volt, 60 Hertz AC
Weight 5.3 Lbs.
Protection class
10
DESCRIPTION cont
KNOW YOUR ELECTRIC HEDGE TRIMMER cont.
CALL-OUTS (Fig. 1)
1. Lock-off button (on rear handle)
2. Front / Full wrap assist handle
3. Safety guard
4. Blade
5. Bubble level
6. Trigger safety switch
7. Extension Cord retainer
8. Pigtail Cord
9. Plug
2.
10. Cutting Bar
3.
4.
10.
11
(Fig. 1)
1.
8.
5.
7.
6.
9.