Imbera 5341211 Series How-To Manual page 3

HOW TO CHANGE THE DOOR OPENING DIRECTION?
13. Place the door at an
"open position" on the cooler,
first on the upper hinge, then
on the bottom one (make sure
the square washer remains on
final position).
13
14 14
15
15. Cut the zip tie to unclip the
wires, these are located on
the right bottom side near
the evaporator.
14. Remove the top
cap to screw the cap to screw the
hinge in the
opposite side of
the cooler.
16
16. Pass the red and black wires through the tie and
close it, connect the wires with the same color.
17
17. It is important to place the
RI-13-008 CHANGE THE DOOR OPENING DIRECTION _R0
safety pin in the guide of
the auto-closing.