Imbera 5341211 Series How-To Manual page 2

HOW TO CHANGE THE DOOR OPENING DIRECTION?
6
9
8
11
12
6-7. Repeat the same operation by unscrewing and
remove the self-closing cartridge.
Switch plastic bushing to self-closing side and vice
7
versa.
8. Remove the top cap.
10
9. On the bottom insert the wires into the door
frame.
10. Then place the cap into cover the hole. 10. Then place the cap into cover the hole.
11. On self-closing side pull out the harness through
the hole.
12. Locate square washer on the closing mechanism of
the door and with the help of a 5/16" open
wrench, spin the washer 90º direction until the
mechanism locks.
RI-13-008 CHANGE THE DOOR OPENING DIRECTION _R0