Download Print this page

HJH office GAMING PRO BY 100 Assembly Instructions page 2

Advertisement

Entfernen Sie vor
dem Einbau die
Schutzkappe vom
Auslösepin der
Gasfeder (falls
vorhanden). Diese
lässt sich leicht
entfernen.
If present, remove
the plastic protec-
tive cap from the
gas lift.
Siehe Rückseite für weitere Informationen.
See the back of this sheet for further information.
Darstellung kann von tatsächlicher Ausführung abweichen.
Illustration may vary from the actual product.
Hinweis / Remark
Packen Sie zunächst alle Teile der Lieferung aus und prüfen
Sie diese auf eventuelle Transportschäden. Um einen leichten
Aufbau zu gewährleisten, empfehlen wir alle Schrauben nur
leicht anzuziehen. Erst nachdem alle Schrauben in das jewei-
lige Gewinde eingeführt wurden sollten diese fest angezogen
werden.
At first please take all parts out of the box and inspect them
for possible transport loss/damage. In order to guarantee easy
setup we recommend that you initially tigthen the screws just
enough to hold, then tighten them firmly when all screws are
in place.

Advertisement

loading