Control Panel - FWE UHST SERIES Operating Instructions Manual

FWE TOP MOUNT HEATED HOLDING CABINETS

CONTROL PANEL

ACTUAL TEMP
CYCLE
LIGHT
POWER
SWITCH
TO SET °F / °C SCALE
• The factory default is °F
• To change, turn the knob to OFF (detent location) and turn Power "
• Turn Power " " while holding the 'TEMP RECALL' button, the control will show '0C' or
'0F' for 3 seconds to verify selection and then return to displaying OFF
• Repeat to toggle to the other units
Note: With a power fail, factory test, etc, the control will retain the 0C or 0F setting
selected by the user when the power is restored.
CHANGING TEMPERATURE SCALE FROM ° F to °C
1. Turn knob to OFF and turn rocker switch "
2. Turn rocker switch " " while pressing the "TEMP RECALL". Repeat to
toggle from °F to °C
8
FWE TOP MOUNT HEAT SYSTEM
LIGHT
TEMPERATURE DIAL
TEMP RECALL
OPTIONAL LOW
TEMP ALARM
"
".