Assembly - Bissell STAINPRO 1623 SERIES User Manual

Assembly

WARNING
Do not plug in your cleaner until you have completely assembled it per the following
instructions and are familiar with all instructions and operating procedures.
Your deep cleaner comes in five easy to
assemble components:
• Handle assembly
• Upper body assembly
• Upper hose rack
• Lower body assembly
• Lower hose rack
Three Phillips head screws are included and can
be found taped to the handle assembly.
The only tool you will need to assemble your
cleaner is a Phillips head screwdriver.
1.
Slide upper body assembly onto lower
body and secure with two screws.
2. With the "tabs" on upper hose rack
pointing toward top of handle, attach upper
hose rack to handle assembly by sliding it
to top of handle until it can go no further.
Turn hose rack until it snaps into place.
3. Slide handle assembly down into upper
body until it will go no further and secure
with screw.
4. Attach lower hose rack to back of upper
body by pushing into open slots and sliding
down until it snaps into place.
5. Wrap flex hose around hose rack and secure
it into notched out holder as shown.
6. Keep flex hose locked in place with hose
secure latch.
1.
2.
Tab
Upper Hose Rack
3.
4.
5.
6.
Hose
Secure
Latch
Notch
www.BISSELL.ca
7