Chorus - Kurzweil M90 User Manual

Voice/Function
Turn the Data Controller knob to adjust the reverb level setting. The minimum setting is
000, and the maximum setting is 127.

Chorus

To Select the Chorus Type:
Press the [Function/Right] button to enter Edit Mode.
Press the Chorus Type key (Ab2).
The LED display will momentarily show:
Use the Data Control knob to select the desired Chorus Type.
Turning the Data Control knob select the desired Chorus Type. Value:000-013( 000:
Off; 001: Chorus 1; 002: Chorus 2; 003: Chorus 3; 004: Chorus 4; 005: Feedback; 006:
Flanger 1; 007: ShrtDelay ; 008 ShrtdlFb; 009: Flanger 2; 010: Flanger 3; 011 Celeste 1;
012:Celeste 2; 013:Celeste 3. (Default: 000)
29
Ab2
To Turn Off the Chorus type:
Turn the Data Control knob until the LED show " type.
To Adjust the Chorus Level :
Press the [Function/Right] button.
Press the Chorus Level key (Bb2).
The LED display will momentarily show:
Turn the Data Controller knob to adjust the chorus level setting.
The minimum setting is 000, and the maximum setting is 127.
" to turn off the Chorus
Bb2
30