Advertisement
Safety and Care Advice
Important
– Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the front cover and pages 2-3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to lay out the parts before
starting.
General care and maintenance
• Always use coasters to protect
the surface from moisture and
heat.
• Take care when moving
furniture - dragging pieces across
the floor will damage the joints.
• Avoid exposing your furniture to
direct and prolonged periods of
sunlight and heat sources as
fading and cracking may occur.
Cleaning and care of lacquered wood
• Dust regularly with a clean dry
cloth.
• Wipe up any spills
immediately with a damp
cloth and then dry the surface
with a clean dry duster.
General information
• If for any reason you should
have problems with your Habitat
product, please contact the store
from which you purchased it.
1
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position ( in the same
room) if possible.
• Do not place furniture directly in
front of radiators, fires or any
other source of heat.
• Parts of the
assembly will be
easier with 2 people.
• Take care to prevent sharp
objects e.g. toys, buckles and
heels from coming into contact
with your furniture, and avoid
contact with chemicals e.g.
cosmetics or hairs products which
may permanently mark the
surface.
• From time to time check that all
the fittings are tight on this piece
of furniture.
• Repeat this procedure for
periodic cleaning.
• Remove stubborn stains with a
weak washing up liquid solution
and a damp cloth and dry after
with a clean cloth.
• Please retain your receipt as
proof of purchase.
If you have any comments or
suggestions regarding this
product, assembly instructions or
service received, please contact
the store or Habitat Head Office
via its web site: www.habitat.co.uk
• Assemble on soft level surface
to avoid damaging the unit or your
floor.
• We do not
recommend the use
of power drills /
drivers for inserting
screws, as this
could damage the
unit. Only use hand
screwdrivers.
• Dispose of all packing carefully
and responsibly.
• Do not open
multiple drawers
at once as this
could destabilise
the unit.
• Do not over
load drawers-
5kg max each.
• The use of furniture polishes or
sprays is not necessary or
recommended.
• Never use abrasive or corrosive
cleaning agents.
• Always use place mats and
coasters to protect the surface
from moisture and heat.
or write directly to:
Habitat Retail Ltd . 489-499
Avebury Boulevard,
Milton Keynes MK9 2NW
max
10kg
Advertisement
