Component Description; Installation Suggestions - Vivotek IP9165-LPC Installation Manual

Component Description

III
Power distribution
M16 1/2" Waterproof cable gland
board
IV

Installation Suggestions

If you plan to install this camera enclosure into a tropical, sea coastal, or an environment
where salt water or corrosive industrial waste water/moist are present, please seal each
stainless steel screws and fittings with a silicon grease compounds. This will help prevent
electrolysis to occur and extend the life span of the camera and housing.
IMPORTANT:
1. Disconnect devices: A readily accessible disconnect device in the building installation wiring
should be incorporated.
2. Electrical Connection: Only a qualified electrician is allowed to make electrical connections.
WARNING:
• Please avoid eye exposure or apply appropriate protection, such as wearing a pair of Infrared
protection glasses, when working with the product. Always use camera live view to oberve IR
lighting effects.
Ventilation fan
Camera Mounting Platform
5
Window frame heater
coil