1. Manuals
  2. Brands
  3. Centre Point Manuals
  4. Measuring Instruments
  5. TL1
  6. Instruction manual

Centre Point TL1 Instruction Manual

Torpedo laser
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
T L 1
T O R P E D O L A S E R
I N S T R U C T I O N
M A N U A L

Advertisement

Table of Contents
loading

Related Manuals for Centre Point TL1

Summary of Contents for Centre Point TL1

  • Page 1 T L 1 T O R P E D O L A S E R I N S T R U C T I O N M A N U A L...
  • Page 2 SAFETY Read the following safety instructions before ▪ Tool service must be performed only by attempting to operate this product. qualified repair personnel. Repairs, service Keep these instructions in a safe place or store or maintenance performed by unqualified in the carry case for future reference. personnel will void the warranty.
  • Page 3 WARNING: DO NOT DISASSEMBLE ▪ Do not set up the tool at a position where THE LASER. There are no user serviceable the laser beam can cross any person at head height. parts inside. Disassembling the laser will ▪ Do not let children come in contact with the void all warranties on the product.

  • Page 4: Item Checklist

    ITEM CHECKLIST Please ensure the following items are included with your laser level. If anything is missing please contact your retailer. AAA alkaline batteries Centre Point TL1 Wall and floor base...

  • Page 5: Laser Overview

    LASER OVERVIEW Power switch / dot mode / line mode Laser port Bubble vial...
  • Page 6 LASER OVERVIEW: BACK Magnets Battery cover door...
  • Page 7 WALL & FLOOR BASE OVERVIEW Mounting holes Metal surface Metal surface Adjustment thumbscrew Hanging hook 1/4” camera tripod thread...

  • Page 8: Using Your Laser

    USING YOUR LASER POWER SUPPLY OPERATION ▪ The instrument is powered by two AAA ▪ To turn the instrument on, slide the power alkaline batteries. switch forward for line operation or back for dot operation. BATTERY REPLACEMENT ▪ To turn the instrument off, slide the power switch to the centre position.
  • Page 9 Power off Power on: dot mode Power on: line mode...
  • Page 10 MOUNTING TO THE WALL & FLOOR BASE ▪ Place the instrument on the wall and floor base. The instrument can be placed either with the power switch facing up or sideways. The magnets will secure the instrument in place. ▪ Rotate the base to the desired angle. ▪...
  • Page 11 Mounting to a wall Mounting to a camera tripod ▪ Insert a screw or nail into a wall with the ▪ Select a place as close as practical to the work site. Ensure the location is clear head projecting. of traffic. ▪...
  • Page 12 MEASURING FUNCTIONS Vertical Alignment The instrument must be placed on a level surface to avoid inaccurate ▪ Mount the wall and floor base onto measurement results. the wall (see page 10 & 11). Place the instrument onto the wall and floor base. When marking, always reference ▪...
  • Page 14 Horizontal Alignment ▪ Mount the wall and floor base onto the wall (see page 10 & 11). Place the instrument onto the wall and floor base. ▪ Use the horizontal bubble vial align the instrument. Adjust the instrument as required by rotating the wall and floor base.
  • Page 16 Alignment of reference points The instrument must be placed on a level surface to avoid inaccurate ▪ Mount the wall and floor base onto measurement results. the wall (see page 10 & 11). Place the instrument onto the wall and floor base. When marking, always reference ▪...

  • Page 18: Troubleshooting

    TROUBLE SHOOTING Error Cause & Solution ▪ Check the batteries. They may be in the wrong way or need replacing. Laser does not turn on ▪ Check the battery compartment for signs of damage. Ensure they are clean and not bent. ▪...

  • Page 19: Care And Maintenance

    CARE AND MAINTENANCE This is a precision measuring instrument ▪ The operator should check the accuracy and should always be handled with care. of the instrument before precision levelling is attempted. Failure to do so may result ▪ Always turn the instrument off when in inaccurate measurements.

  • Page 20: Warranty

    WARRANTY The Centre Point TL1 comes with a 3 (three) year manufacturers warranty. This instrument is intended for DIY use only. Using this instrument for professional trade applications will void the warranty. AUSTRALIA NEW ZEALAND “Our goods come with guarantees that cannot...

  • Page 21: Customer Support

    CUSTOMER SUPPORT To assist you with any queries or technical questions please contact customer support Australia: 1300 658 338 New Zealand: 0800 367 527...

  • Page 22: Specifications

    SPECIFICATIONS Specifications Centre Point TL1 Product code 400030 Warranty 3 Years Accuracy ±4mm at 10m Operating range 10m (indoors) Laser class 2 Red Battery life 10 hours Battery type 2x 1.5v AAA Lines Dots IP rating Weight (kg) 0.12 Dimensions (mm)
  • Page 23 NOTES...
  • Page 24 w ww.s p oton .c om .au...

Table of Contents