Advertisement
APEX
TEAR DOWN
®
FOLDS UP FOR CONVENIENT STORAGE
Logo on arm
STEP 1
Twist Keyboard End Stops to closed position. Keyboard End Stops must
be folded back for storage.
STEP 2
Press red button below arm and pull to detach arm. Press red top
button to pop cap and place arms inside. Arm end with logo goes in
first. Arms should fit easily in holes. If top does not close check arms
to make sure they are properly put into holes.
Top view of leg
storage
STEP 3
Slide bag over stand. Handle should be facing front and on same
side as longer legs.
STEP 4
Standing behind of stand pull tote bag towards you while walking
backward and lay tote bag on ground. Handle should be on top.
STEP 5
Release legs so that they are ready to be pushed in.
STEP 6
Push legs in until they snap inside stand. Zip up bag for next use.
Do not slam legs into stand – this can cause the locking tabs to drop into
the leg itself. If this occurs, please contact Customer Support for assistance.
6
ARMS NEED TO BE IN THE PROPER ORIENTATION.
APEX
ACCESSORIES
®
TOTE BAG & TELESCOPING BOOM
-Included with all Apex Stands
AX-90BAG TOTE BAG
Bag designed to aid in set-up and TIER-down, protecting the stand's finish. Simply
store the tiers inside the top of the stand and slip the bag over the top. Laying the
bag down with the stand inside, store the legs in the bottom and zip up the bag end.
Bag has top end handle and carrying strap.
• AX-90BAG #17263
• Heavy-duty, padded and zippered Tote Bag. Holds one AX-90
Series Column Keyboard Stand, plus one AX-90MIC boom.
-Not included
-Available Separate
AX-90MIC BOOM
Telescoping "Ulti-boom" utilizes height adjustment channel inside of the New Apex
body. Super clean looks combined with perfect functionality. Quickly detaches and
stores in protective Apex Bag pocket.
• AX-90MIC #17222
• Telescoping boom length 18.9" - 33.9"
(480 mm - 860 mm)
7
Advertisement
