Ultimate Support APEX Series User's Product Manual page 3

APEX ARMS & ADJUSTMENTS
®
ADJUST HEIGHT, LENGTH, AND ANGLE
Release
6
Arms
Button
STEP 6
Press red release button to pop cap and pull out arms. Snap arms into place,
adjustment buttons face down, and logos on arms read right side up. Make sure
arms are locked into position by pulling back on arms.
7
Keyboard End
Stopper
STEP 7
Twist Keyboard End Stops to hold keyboard in place. Keyboard End Stops must be
folded back for storage.
Front View
8
Up & Down Up & Down
Nob Nob
STEP 8
To adjust the tier height pull on both nobs on front side of tiers at the same time.
Adjust up or down to desire height. At desired height release nobs and press down
to ensure locked position.
4
Adjustment Button
Adjustment Button
Keyboard End
Stopper Locked
Side View
Up & Down
Nob
9
Angle Nob
Back View
STEP 9
To adjust arm angle pull the nob on the desired side. Snap arm into place aligning
red lines. Repeat for remaining arms.
10
STEP 10
To adjust arm length push in buttons on bottom of arms and adjust out or in.
11
Cord clip
Cord clip
Angle Nob
Side View
4 Locking Positions
Keyboard cord
STEP 11
Place cord to
keyboard down
center of stand
and turn clips to
lock in place.
Keyboard cord
5