Advertisement
1. General
1.4 FCC / IC Compliance
Note:
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equip-
ment is operated in a commercial environment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio com-
munications. Operation of this equipment in a
residential area is likely to cause harmful inter-
ference in which case the user will be required
to correct the interference at his own expense.
Hereby, Leica Microsystmems CMS GmbH declares that the radio equipment type
LID Module 1.0 designation of type of radio equipment] is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: www.leica-microsystems........................
4
!
Notice:
This device complies with Part 15 of the FCC
Rules [and with Industry Canada licence-exempt
RSS standard(s)].
Operation is subject to the following two condi-
tions:
1.
this device may not cause harmful interfer-
ence, and
2.
this device must accept any interference
received, including interference that may
cause undesired operation.
!
Notice:
Changes or modifications made to this equipment
not expressly approved by Leica Microsystems
CMS GmbH may void the FCC authorization to op-
erate this equipment.
Advertisement
