Area Of Use; Technical Information - Hafele dialock User Manual

Door terminal basic
Table of Contents

Advertisement

Attention!
It is essential that you read the "Commissioning" section of these
instructions before commissioning (allocation of keys).

Area of use

The Door Terminal Basic is an electronic door fitting used principally
in the hotel sector. It is mounted on interior doors with mortise locks
acc. to DIN 18 251 and can also easily be retrofitted on the door leaf.
Depending on the design, the fixing plate on the Door Terminal Basic
can also be mounted on doors whose mortise locks deviate from DIN
18 251.

Technical information

All Door Terminals Basic are supplied in the simple operating
mode. In this operating mode, access rights for up to 26 electronic
keys can be allocated directly at the Door Terminal Basic with a
special Programming ADD Key-stick (green). These access rights
can be withdrawn again from an authorised electronic key at the
Door Terminal Basic using a Programming DELETE Key-stick
(red). Please contact your Dialock distributor if a different operating
mode is to be selected.
The Door Terminal Basic consists of the outer module (fixing plate
with bracket and cover) that is mounted on the outer side of the
door, and rosette fittings that are mounted on the inside of the door.
The Door Terminal Basic has no infrared interface but can be
configured using Parameter and Special Transponders.
The Door Terminal Basic is battery-powered, and operated using
electronic keys.
26
Mounting Instructions

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents