Page 1
Installation, Operation & Maintenance Manual romaSteam steam Feel Good Inc. ®...
Page 2
Operation ......7 • The use of any oils other than Mr.Steam oils may introduce excessive concentration of oil into the steam room, resulting in a health hazard.
Page 3
4. Do not install AromaSteam Systems outdoors. This room is equipped with an aromatic oil dispensing system 5. Do not install AromaSteam Systems in a location where water could freeze. Leave the room immediately if you have any adverse or 6.
Page 4
(cont.) Clearance to heat sources • Do not install the AromaSteam system directly below or above the Mr. Steam steam generator where it is subject to heat. • Minimum distance between the AromaSteam system and a heat source (e.g. steam generator, heating system) is 1.5 ft.
Page 5
® AromaSteam Operation and Installation Instructions ______________________________________________________________________________________________ Installation of Suction Hose to AromaSteam System Suction Suction Pump Pressure Pressure End Nut Valve Head Valve End Nut 1. Unscrew the suction end nut from the pump head and remove short end of shipping hose (discard shipping hose, keep pressure end nut).
Page 6
7. Drain injector. Repeat steps until the injector is filled. 8. Save the oil injector as it will be needed when new oils are used. Filling the Pressure Hose Figure 6 1. Insure the AromaSteam System is primed and the scent container AromaSteam is full. Metering Pump 2.
Page 7
20 min. 110˚ F 2. In the dashboard press the AROMA button, the button will STOP AromaSteam be highlighted when AromaSteam is on. User 1 User 2 3. Aroma oils will automatically be pumped into the steam line at preset intervals.
Need help?
Do you have a question about the AromaSteam and is the answer not in the manual?
Questions and answers