WES 1000& 2000 – Installation and Hardware Guide
Layout inside an AC voltage W.E.S. 2000 Enclosure
2.3.1
Power
2.3.1.1
Supply DC Voltage W.E.S Unit
DC 11-30Vdc is to be wired to the terminal block in the bottom right of the enclosure and then secured
using a locking tie strap.
*Note 11-30V Direct current only, do not wire with 110v+ line voltage
Terminal Block for supply voltage is IN1(+DC/L) & IN2(-DC/L)
IN1: Positive DC Voltage
IN2: Negative DC Voltage
2.3.1.2
Supply AC Voltage W.E.S Unit
AC Single phase 90-260Vac is to be wired to the terminal block on in the bottom right of the enclosure,
and then secured using a locking tie strap.
7
Fig 2.6- Shown: Internal components W.E.S 2000 AC
V 1.3