Advertisement
Quick Links
Advertisement
Related Manuals for Tucker-Davis Technologies, Inc. RZ5
Summary of Contents for Tucker-Davis Technologies, Inc. RZ5
- Page 1 RZ5/RZ5D/RZ5P/RZ6 Processor Operator’s Manual...
- Page 2 RZ5/RZ5D/RZ5P/RZ6 Processor Operator’s Manual Copyright © 2010-2019 Tucker-Davis Technologies, Inc. (TDT). All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the express written permission of TDT.
-
Page 3: Power Supply
This manual provides the directions necessary for powering the Processor on and off as well as its communications functionality and User Interface features. Refer to the System 3 Manual provided by TDT for specific instructions on how to program the RZ5, RZ5D, RZ5P, or RZ6 Processor device. - Page 4 Avoid unnecessary eye contact. Connecting the RZ5/RZ5D/RZ5P/RZ6 Interface to your PC Before connections can be made from the RZ5/RZ5D/RZ5P/RZ6 to your PC, the PCI interface card must be installed in your PC. For more information refer to Installing the Optibit Interface in the System 3 Installation Guide.
- Page 5 PC interface, the preamplifier ports, and system I/O. The Mode button allows the user to cycle between information. Press and hold the mode button to automatically cycle through each display. Refer to the RZ5, RZ5D, RZ5P, or RZ6 section of the System 3 Manual for more information.
-
Page 6: Monitor Speaker
A knob located on the front plate is used to adjust the volume of the output. The knob is labeled for MIN and MAX volume settings. Refer to the RZ5, RZ5D, RZ5P, or RZ6 Processor sections in the System 3 Manual for more information. - Page 7 RZ5/RZ5D/RZ5P/RZ6 Processor Operator’s Manual ➢ Operation of this device in the presence of flammable gases or fumes is strictly prohibited to avoid safety hazards. ➢ Do not subject this device to excessive vibration or shocks during handling or shipping and avoid dropping the device.
- Page 8 Cleaning the Processor Device To clean the device: Remove power from the RZ5/RZ5D/RZ5P/RZ6 device chassis. Clean the external surfaces and VFD screen of the device with a soft, dry cloth. Do not attempt to disassemble and clean the inside of the device.
- Page 9 RZ5/RZ5D/RZ5P/RZ6 Processor Operator’s Manual RZ5/RZ5D/RZ5P/RZ6 Technical Specifications Technical specifications for the RZ5, RZ5D, RZ5P, and RZ6 Processor Devices. Refer to the RZ5, RZ5D, RZ5P, and RZ6 Technical Specifications in the System 3 Manual for more information. Chassis Height 3U Width Standard 19’’ rack mount...
Need help?
Do you have a question about the RZ5 and is the answer not in the manual?
Questions and answers