Siemens Gigaset S450IP Owner's Manual page 28

¢
u
Telephony Connections
Configure your phone for VoIP.
Download your VoIP provider's general
access data from the Internet onto your
phone or enter the data yourself.
Enter the personal access data for your
VoIP account (VoIP phone number)
with this VoIP provider.
Activate/deactivate this VoIP phone
number as necessary.
The phone registers itself with the VoIP
server using the activated VoIP phone
number and can be reached at this
number.
¢
u
Telephony DTMF
DTMF signaling is required, for example
to check and control some network
mailboxes.
Specify how DTMF signals are to be
transmitted for VoIP. In RTP packets
(such as voice data) or in SIP info pack-
ets.
Ask your VoIP provider which type of
DTMF signaling is supported.
¢
u
Telephony Dialing Plans
You can activate and deactivate the fol-
lowing dialing plans:
– For VoIP calls, an area code is auto-
matically added in front of all num-
bers that do not start with 0.
Specify this area code.
– Stored emergency numbers are
always dialed via the fixed network.
The stored emergency numbers are
displayed. You can enter a phone
number of your own.
¢
u
Telephony Directory
Store your outlook contacts in a tsv file
on your PC and load this onto your
handset. The contacts are copied to the
handset directory.
Back up the directories for your hand-
sets on a PC.
u
Messaging
Enter the access data for your messen-
ger server and your e-mail server.
You can specify a resource name your
phone should use to log on to the mes-
senger server as well as a priority for
message delivery. If you are online and
using more than one device, any mes-
sage from a buddy will be sent to the
device that has the highest priority.
u
Miscellaneous
State whether you wish to receive
information about new firmware ver-
sions available online.
For the following firmware update you
can specify the server/PC that is to
make the update, and if required load
new firmware onto the phone.
View the VoIP status codes on the
handset to diagnose problems with
VoIP connections.
You will find the description of the
Web configurator in the detailed user
guide for your Gigaset S450 IP on the
Internet at www.siemens.com/gigaset.
Web configurator
27