Siemens Gigaset S450IP Owner's Manual page 11

First steps
Connecting the base station with the
fixed network and the electrical power
supply
¤
Please first connect the phone jack
and then the power adapter, as shown
below.
1
2
1 Phone jack with phone cord
2 Underside of the base station
3 Power adapter 110 V
Please note:
u
Keep the power adapter plugged in at
all times for operation, as the phone
does not work without a supply of elec-
tricity.
u
If you buy a replacement phone cord
from a retailer, ensure that the phone
jack is connected correctly.
Correct phone jack assignment
3
2
1
You can now use your phone to make calls
via the fixed network and can be reached
at your fixed network number!
10
3
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused
Connecting the base station with the
router
For Internet access you need a router con-
nected to the Internet via a modem (if nec-
essary, this can be integrated in the
router).
1
2
1 Side view of the base station
2 Network plug (LAN) with network cable
3 Router network plug
As soon as the cable connecting the
phone and router is plugged in, the paging
key lights up on the front of the base
station (page 1).
3
3