Waterpik Sidekick WF-04 Quick Start Manual

Step 1
Unit Prep
A. Connect power cord to
power supply and to base
unit. Plug into electrical
outlet.
Step 2
Water Floss
Low
A. Slide to lowest
pressure setting.
This device is compatible with voltages of 100 – 240 VAC, 50/60 Hz
S I D E K I C K
Power
B. Place tip in mouth and close lips
enough to prevent splashing. Turn power
ON allowing water to flow from mouth into
the sink. Increase pressure to your liking.
™
B. Assemble unit
as shown.
Quick Start Guide – WF-04
For a how-to video, product
registration, and additional support
visit waterpik.com/WelcomeWF
Power
C. Fill reservoir with warm water and
place it firmly on the base. Slide pressure
to high, point tip into sink, turn power
ON until water flows. Turn power OFF.
High
C. Aim water at the gumline at
a 90 degree angle. Follow the
gumline and pause briefly
between teeth.
©2018 Water Pik, Inc.
Fill
High