Hampton Research HR8-162 User Manual

Circle Cover Slide Gizmo
User Guide
Circle Cover Slide Gizmo Compatibility
The Circle Cover Slide Gizmo is compatible with:
• 22 mm diameter, siliconized circle glass cover slides (0.22 mm thick)
Recommended Circle Glass Cover Slides
HR3-231
- 22 mm x 0.22 mm Siliconized circle cover slides - 1 oz pack
(~100 slides)
HR3-233
- 22 mm x 0.22 mm Siliconized circle cover slides - 10 oz case
(~1,000 slides)
Cover Slide Gizmo Description
The Dispenser holds up to 78 22 mm x 0.22 mm plain or siliconized circle
cover slides. The dispenser is notched on the front and back side to allow easy
finger access when loading and unloading cover slides. The Dispenser moves to
the right and left ends of the cover slide Gizmo along two chromed Rails. The
rails are positioned over the cover slide Platform. Each Rail is secured to the
Cover Slide Gizmo with 2 mm allen head screws. A top edge of the Platform is
notched at each cover slide position to allow finger or forceps access to the cover
slides dispensed onto the Platform. The Base of the Cover Slide Gizmo has
four rubber feet to keep the Cover Slide Gizmo flat and stationary. A clear plastic
Cover supplied with the Cover Slide Gizmo fits over the Dispenser to keep cover
slides clean during operation.
Figure 1
Top View of Circle
Cover Slide Gizmo
Dispenser enclosed
by clear plastic
Cover
Using the Cover Slide Gizmo
Position the Cover Slide Gizmo such that the finger and forceps access is fac-
ing you. Clean any dust or debris from the Cover Slide Gizmo. Position the
Dispenser all the way to the left end of the Cover Slide Gizmo, Figure 2. Re-
move the Cover from the Dispenser. Fill the Dispenser with 22 mm x 0.22
mm circle cover slides. The Dispenser can hold up to 78 cover slides. Be sure
no cover slides are positioned on the Platform to the right of the Dispenser.
Place your thumb and first finger gently onto the front and back top edge of the
Dispenser, no need to press down on the Dispenser. Slide the Dispenser all the
way to the right end of the Platform until the Dispenser is against the right end
stop. Six cover slides will be positioned onto the platform. See Figure 3 below.
Base
Chrome Rail Notched
Platform
Figure 2
3 Steps when setting up the
Circle Cover Slide Gizmo
Figure 3
Build your drop. One at a time, two at a time...six at a time, the choice is yours.
2 mm Allen
Building drops one at a time will expose drops to less evaporation than building
Screw
six drops at a time. To remove slides, one at a time from the Cover Slide Gizmo,
gently place your thumb and first finger on opposite sides of the slide, lift and
place the cover slide onto the crystallization plate. Or, one can use forceps to
gently grasp the cover slide and place the cover slide onto the crystallization
plate. Once all of the cover slides are removed from the Platform, to dispense
more cover slides, simply move the Dispenser all the way to the left end of the
Platform until the Dispenser is against the right end stop. Six cover slides will
be positioned onto the Platform.
To dispense a single cover slide, simply move the Dispenser one position on the
Platform. Please see Figure 4. The black background of the Cover Slide Gizmo
allows one to see if the drop remains clear or contains precipitate during the
drop build.
Figure 4
Solutions for Crystal Growth
HR8-162 (pg 1)
2. Fill Dispenser with 22 mm
Circle Cover Slides
1. Remove 3. Replace Clear Plastic Cover
Clear Plastic Cover to keep Cover Slides in the
Dispenser clean