Siemens SIMATIC S7-300 Getting Started page 8

1 Welcome
4
Validity
These instructions apply to the following CPUs:
Abbreviation Order no.
312C 6ES7312-5BE03-0AB0
Prerequisites
You are proficient in working with the Microsoft
You are familiar with the basics of electronics and electrical engineering.
Warning
Dangerous currents and voltages!
Serious bodily injury and damage to machinery and equipment can occur if
you do not observe the safety and accident prevention regulations, e.g.,
IEC 204 (emergency STOP devices).
Operation of an S7-300 in plants or systems is governed by special rules
and regulations, depending on the specific field of application.
SIMATIC S7-300 Getting Started for First Time Users
Getting Started, 04/2007, 6ZB5310-0NC02-0BA0
You will need a micro
memory card (MMC) As of firmware
for operation version
X V 2.6
® TM
Windows operating system.