Siemens SIMATIC S7-300 Getting Started page 16

Getting started for first time users

Hide thumbs Also See for SIMATIC S7-300:

Table of Contents

2 Preparing the PC

3. Configure the connection to the USB interface. This connection property

enables communication between the MPI interface of the CPU 312C and

your PC.

You have installed STEP 7 Lite and the software for the PC Adapter USB and

configured the interfaces between the PC Adapter USB and the CPU 312C.

Next, you will install the control components on the mounting rail.

SIMATIC S7-300 Getting Started for First Time Users

Getting Started, 04/2007, 6ZB5310-0NC02-0BA0

Table of Contents