Alemlube 20044N Owner Technical Manual

Description
20044N Cordless LED Workshop Light is the ideal portable light source due to its low heat output, constant brightness, high shock
resistant TPE and PC housing. The 20044N cordless LED workshop light features a 3W COB high power super bright LED for large
area light emission.
Two LED battery lights indicate the state of the battery life. A 360º fold away hanging hook is built in for convenient hands free use at
any time.
Charger
Voltage / Current
Battery
Charging time
Discharging time
Luminous flux
Features
• Completely portable, rechargeable workshop light
• 3W COB high power super bright light emission
• 1 rear hook enable mounting for under-hood & under-car applications
• Includes a wall charger and an in-car charger
Battery treatment/charging:
• 2 alternately flashing green LEDS indicate power is lower than 50%
• 1 green LED flashing and one constantly on indicate power is more than 50%
• 2 green LED's constantly on indicate charging is complete
• Do not leave battery in full discharged condition
• Recharge the work light at least once in every 30 days
Warning & Safety Issues:
• Red indicator light constantly on (when the light is on): Time to recharge.
• Avoid looking directly into the beam
• Do not use the lamp near open flames
NSW QLD/PNG
TEL: (02) 9939 0711 TEL: (07) 3204 9166
FAX: (02) 9939 0411 FAX: (07) 3204 1224
Visit our website at
OWNER'S TECHNICAL MANUAL
Cordless LED Workshop Light
AC 100~240V 50/60Hz
DC 5V/1A
3600mAh Lithium-ion
≤3.5 hours
≥4 hours
230-250lm
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
www.alemlube.com.au
WA SA/NT
TEL: (08) 9302 4199 TEL: (08) 8241 7111
FAX: (08) 9303 2095 FAX: (08) 8241 7011
Email - info@alemlube.com.au
20044N
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008