Table of Contents
Advertisement
3. DMX Mode (DMX channel Mode Setting)
Use this mode to set the device to be controlled by DMX controller with
optional DMX channels..
There are 5 DMX channel modes to be selected.
Press MENU to select the DMX Mode mode, press ENTER. Then use the UP and DOWN to
set the DMX channel modes.
6 Ch
8 Ch
12 Ch
HSV (H = Hue, S = Saturation, V = Brightness)
HSI (H = Hue, S = Saturation, I = Intensity)
Please refer to DMX VALUES chart for the channels detail.
4. Slave Mode
You can use this mode to set the unit to run as Master or Slave model
The unit default setting is "Slave"
Press MENU to select the Slave Mode mode, press ENTER. Use UP and DOWN to select the
desired setting. Master/ Slave.
5. White Balance
This mode is for user to set the custom configurable setting of white balance..
Press MENU to select the White Balance mode, press ENTER.
Use UP and DOWN to select Balance [ Red ] / [Green ] / [ Blue ], press ENTER
Red [ 000 – 255], Green [ 000 – 255], Blue [ 000 – 255] display, use UP and Down to adjust
the numeric value.
Press MENU to save the setting and go back.
6. Dimmer Mode (Dimmer Curves setting)
Press MENU to Select Dimmer Mode, press ENTER, then use UP and DOWN to select the
following dimmer modes:
[ OFF ] (Linear dimmer mode, close dimmer curves, instant dimmer response)
[Curve 1 ] Dimmer curve1, Square Law dimming.
[Curve 2 ] Dimmer curve2, Inverse-square Law dimming.
[Curve 3 ] Dimmer curve3, S-Curves dimming.
7. Refresh Rate ( To set the PWM refresh rate of LED)
This device has optional LED PWM refresh rates for professional camera requirements.
Press MENU to Select Refresh Rate mode, press ENTER, then use UP and DOWN to select the
following refresh modes:
Refresh [ 800 HZ ]
Refresh [ 2K HZ ]
Refresh [ 4K HZ ]
Refresh [ 10 KHZ ]
Refresh [ 20 KHZ ]
Refresh [ 25 KHZ ]
8. Keys Lock (Keys lock/unlock password)
Press MENU to select the Keys Lock, press ENTER. Then use UP and DOWN to set the keys
lock function to Lock [ No ] or [ Yes ].
When select Lock [ Yes ], the keys will be locked after 30 seconds without operating.
Input password UP+DOWN+UP+DOWN, press ENTER to unlock the keys.
When select Lock [ No ], the key lock function is not available.
Advertisement
Table of Contents
