Boxxline BX-LPP SERIES User Manual page 4

CONTROL PANEL OPERATIONS
Static Color
STATIC [Manual] (Static Colors User manual Setting)
This mode allows the user set intensity of RED, GREEN, BLUE, WHITE, AMBER, PURPLE (UV)
separately to get endless color mixing from the control board without DMX controller as well
as to set the device to run strobe desired.
Press MENU to select the Static Color mode, press ENTER
Use Up and Down to select the STATIC [Manual], press ENTER
"MANUAL [Red]" display, press ENTER again, use UP and DOWN to adjust the numeric value
(R = 000-255), press ENTER. Then use UP and Down to select "MANUAL [Green], repeat
above setting, do same for BLUE/WHITE/AMBER/PURPLE and STROBE (Value 000-255)
Press MENU to save the setting and go back.
When enter this mode, the device will be set as the Master unit automatically.
Static [Solid] (Solid Colors Setting)
This mode has 63 solid colors to be selected.
Press MENU to select the Static Color mode, press ENTER
Use the UP and DOWN to select the solid colors desired, press ENTER,
your selection will be saved.
Mode: Value:
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
SATIC Color 15
[Solid] Color 16
Color 17
Color 18
Color 19
Color 20
Color 21
Color 22
Color 23
Color 24
Color 25
Color 26
Color 27
Color 28
Color 29
Color 30
Function:
Red
Green
Blue
White
Amber
Purple
Red + Green
Red + Blue
Red + White
Red + Amber
Red + Purple
Green + Blue
Green + White
Green + Amber
Green + Purple
Blue + White
Blue + Amber
Blue + Purple
White + Amber
White + Purple
Amber + Purple
Red + Green + Blue
Red + Green + White
Red + Green + Amber
Red + Green + Purple
Red + Blue + White
Red + Blue + Amber
Red + Blue + Purple
Red + White + Amber
Red + White + Purple