Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Antari PM-1
Summary of Contents for Antari PM-1
- Page 1 PM-1 Pan Motor User Manual English © 2016 Antari Lighting and Effects Ltd.
-
Page 3: Safety Information
Protect power cord from being walked on or pinched particularly at plugs. ․ Make sure there are no flammable materials close to the fixture while operating. ․ If the fixture fails to work, unplug the fixture and stop operation immediately. Contact ․ your local Antari dealer for advise. - Page 4 If any parts appear damaged or mishandled from shipping, notify the shipper immediately and retrain the packing material for inspection. What is included: 1 x PM-1 Pan Motor 1 x Power Cord 1 x Omega Clamp 1 x User Manual...
-
Page 5: Product Overview
Product Overview Setting Up AC Power Connection This fixture includes an auto sensing power supply ranging from AC100-240V, 50-60Hz. Only connect fixture to AC power within this range. Data Linking Serial data links is required when operating the fixture through DMX controller. When planning the data link please consider following: Maximum recommended length of data link is 500 meters. -
Page 6: Operation
least 10 times the weight of the fixture. Make sure no combustible or flammable material nearby. ․ Secure each fixture with an approved safety cable that can hold at least 10 times the ․ weight of fixture. Make sure fixture installed in a well ventilated area. ․... - Page 7 Button Function [MENU] Scroll through setting menu ▲ [UP] ▼ [DOWN] Down [ENTER] Setup/Confirm Control Menu Addr Set DMX address from 1 to 512 ChNd Set DMX channel mode 01 or 02 ShNd Select auto chase pan movment 60/90/120 degrees SPNd Select auto chase speed from 1 to 5 SLND...
- Page 8 RSet Reset fixture to factory default setting DMX Connector Pin Assignment The fixture provides 3 pin XLR connector for DMX connection. Diagram below indicate pin assignment information Function Ground Data- Data+ DMX Operation Making DMX connection – Connect machine to a DMX controoler or to one of the machines in the DMX chain.
-
Page 9: Service And Maintenance
channels. The starting address is defined as the first channel from which the fixture will respond to the controller. Always double check to make sure there are no overlapping channels in order to control the fixture correctly. DMX Channel Function Channel Mode Channel Value... -
Page 10: Technical Specifications
․ Unplug fixture from AC power before starting. ․ Use vacuum or air compressor and soft brush to remove dust on components and vents. ․ Clean fixture with a moist, lint-free cloth. ․ Never use alcohol or solvents. Technical Specifications Input voltage AC100-240V 50-60Hz Power... - Page 12 C08PM0100...
Need help?
Do you have a question about the PM-1 and is the answer not in the manual?
Questions and answers