Table of Contents
Advertisement
Available languages
Available languages
P73890-A_F5U222ea_man.qxd
Installation (continued)
1.
Right-click on "My Computer".
2.
Select "Properties".
3.
Select the "Hardware" tab and click on the "Device
Manager" button.
4.
Click the plus sign (+) next to "Universal Serial
Bus Controllers".
The "Universal Serial Bus Controllers" list will now include
two "NEC USB Open Host Controller" entries, one
"Belkin USB 2.0 Hi-Speed Host Controller" entry, one
"USB 2.0 Root Hub Device" entry, and two "USB Root
Hub" entries.
Note: If your computer features built-in USB ports, or if
you have other USB PCI controllers installed, you will
see additional root hub entries.
Installing a Hi-Speed USB 2.0 Hub
Note: During installation of a Belkin Hi-Speed USB 2.0
Notebook Card driver, a Hi-Speed USB 2.0 Hub driver
is also installed. When you attach a Hi-Speed USB 2.0
Hub to your Card for the first time, follow the
procedure described below.
1.
Turn on your computer.
2.
Plug the power adapter (ships with the hub) into the
hub and into a wall outlet.
3.
Connect the flat end of the USB cable supplied with
the hub to your computer and the square end of the
cable to the upstream port of the hub.
9/30/02
3:48 PM
Page 13
13
En
Advertisement
Table of Contents
