Cm-T43 Features - CompuLab CM-T43 Reference Manual

2.3

CM-T43 Features

The "Option" column specifies the CoM/SoM configuration option required to have the particular
feature. When a CoM/SoM configuration option is prefixed by "NOT", the particular feature is
only available when the option is not used. A feature is only available when a CoM/SoM
configuration complies with all options denoted in the "Option" column.
"+" means that the feature is always available.
Table 3
Feature
CPU
Graphics
Acceleration Unit
Real-Time
Coprocessor
RAM
Storage
Display
Touchscreen
Camera
Gigabit Ethernet
WiFi
Bluetooth
NFC
Analog Audio
Digital Audio
Local Bus
USB
Serial Ports (UARTs)
CAN bus
MMC/SD/SDIO
SPI
I2C
1-Wire
GPIO
ADC
RTC
Revised September 2017
Features and Configuration options
CPU Core and Graphics
Texas Instruments Sitara AM4379 ARM Cortex-A9, 1GHz
NEON™ SIMD and VFPv3
Texas Instruments Sitara AM4376 ARM Cortex-A9, 800MHz
NEON™ SIMD and VFPv3
PowerVR SGX530 GPU supporting Direct3D Mobile, OpenGL-ES 2.0
and OpenVG 1.0
Programmable Real-Time Unit Subsystem supporting 1588, BiSS,
EnDat 2.2, EtherCAT, EtherNet/IP, Ethernet POWERLINK,
HIPERFACE DSL, PROFIBUS, PROFINET RT/IRT, SERCOS III and
Sigma Delta Filter protocols
Programmable Real-Time Unit Subsystem supporting 1588, BiSS,
EnDat 2.2, EtherNet/IP, HIPERFACE DSL, PROFIBUS, PROFINET
RT/IRT, SERCOS III and Sigma Delta Filter protocols
Memory and Storage
128MB – 1GB, DDR3-800, 32-bit data bus
On-board SLC NAND flash, 128MB - 512MB
On-board eMMC flash, 4GB - 32GB
Display and Camera
Parallel 24-bit display interface - up to 100 Mpixels/sec
Remote frame buffer interface
On-board 4/5/8-wire resistive touch-screen controller
Capacitive touch-screen support through SPI and I2C interfaces
Primary 12-bit parallel camera (VPFE) interface
Secondary 12-bit parallel camera (VPFE) interface
Network
Primary 1000/100/10Mbps Ethernet port (MAC+PHY)
Secondary 1000/100/10Mbps Ethernet port (MAC+PHY)
Dual-band, dual-antenna 2x2 MIMO 802.11ac/a/b/g/n WiFi interface
Bluetooth 4.0 (low energy)
NFC - full protocol support for ISO 14443A/B, ISO 18092 and ISO
15693
Audio codec with analog stereo output, stereo input and electret
microphone support
I2S compliant digital audio interface
External local bus interface, variable rate up to 100 MHz, up-to 16-bit
USB2.0 high-speed dual-role (host / device) port
USB2.0 high-speed host port
Up to 6 UART ports, 16C750 compatible, 3.3V interface, up to 3.6
Mbps
Up to 2 CAN bus interfaces, 3.3V levels
Up to 3 MMC/SD/SDIO interfaces
Up to 4 SPI bus interfaces
Up to 2 I2C interfaces
1-Wire interface
Up to 133 multifunction signals. Can be used as GPIO (shared with other
functions)
Up to 16 general-purpose ADC channels
System Logic
Real time clock, powered by external lithium battery
CM-T43 Reference Guide
Description
Audio
I/O
Overview
Option
C1000M
C800
C1000M
C1000M
C800
D
N
+
+
+
+
+
not WB
E1
E2
WB
WB
WB
A
not A
+
+
+
+
+
+
+
+
+
+
+
+
9