Related Manuals for Siemens AG AT18
Summary of Contents for Siemens AG AT18
- Page 1 Condensed Operating Manual for Door Control Unit AT8 SIDOOR Condensed Operating Manual AT18 Rev. 09, Issue Date 8/2007 www.siemens.de/edm...
-
Page 2: Overview Of Operating Elements
- Close - Open X7: Motor plug X8: Connection for user terminal and USB adapter (AT Frontend PC) H5000: 7-segment display for door status and error code S5000: Door parameter button S500: Service button “OPEN” S500: Service button “CLOSE” Relay module (Option): X: Relay output “CLOSE”... -
Page 3: Safety Instructions
3. Bolt the timing belt and the door clutch holder together and set it up. 4. Tighten the timing belt with the aid of the tensioning equipment. The correct tension is achieved when the timing belt can be pushed in by cm per every meter distance between the drive pinion and the overhead pulley. - Page 4 3. Plug in clip plugs X6 and X4. CAREFUL The control is operative after the next switch-on. At a presented control signal the door moves into the specified direction. 4. Switch control on (plug in mains current plug, or plug X3).
- Page 5 S5000). 6 Relay contacts (option) The relay contacts of the optional relay module can be set to relay the following door statuses to the elevator control of higher ranking order: X (Pin and Pin3 closed) X (Pin and Pin3 closed) X3 (Pin and Pin3 closed) In illustration the contacts are shown in an inactive status (Pin and Pin3 closed).
- Page 6 Escape key, jump back to menu above Menu selection key, increase of a parameter value Menu selection key, reducing of a parameter value The taking over/acceptance of an adjusted parameter always takes place in the door position “CLOSE”. Menu of the HT18: Jump to...
- Page 7 Condensed Operating Manual for Door Control Unit AT8...
- Page 8 Condensed Operating Manual for Door Control Unit AT8 Ýçindekiler Ýçindekiler ... Giriþ ...4 Güvenlik notlarý ...5 Genel güvenlik bilgileri ...5 Kavramlar ...6 Kumanda elemanlarýna genel bakýþ ...7 www.siemens.de/edm Fonksiyonlar ve cihaz tepkileri ...8 Adaptasyon ve test sürüþü ...8 KAPI AÇMA komutu ...8 KAPI KAPATMA komutu ...8...