1:12 RC
Dune Warrior
Install Battery in the Transmitter
1. Turn off the transmitter.
2. Use a screwdriver to open the battery compartment cover.
3. Insert one 9V battery (not included), matching the
polarity symbols (+ and –) marked inside the battery
compartment. Replace the battery cover and secure it
with the screw.
©2014 RadioShack Corporation.
All rights reserved. RadioShack is a trademark used by RadioShack Corporation.
6001056,6001071_UG_EN_051214.indd 1
We hope you enjoy your RC Dune Warrior from
RadioShack. Please read this user's guide before setting
up and using your vehicle.
What's Included
• RC Dune Warrior
• Transmitter
Age 6+
• Battery Pack
• Charger
• User's Guide
Features
• Digital Proportional Steering and Speed control
• Up to 1000 feet (305m) per minute
CHOKING HAZARD! Small parts. Not for children
under 3 years.
Install Battery Pack in the Vehicle
1. Turn off the vehicle.
2. Use a screwdriver to open the battery cover, then
plug the jack of the 9.6V battery pack into the
battery socket. Make sure you fit the battery and
battery cables neatly inside.
3. Replace the battery cover and
secure it with the screw.
ON/OFF
General Motors trademarks used under license to Scientific Toys,Ltd.
Printed in China
06A14
6001056, 6001071
6/19/2014 10:14:26 AM