Table of Contents
Advertisement
WWW.SDS.LTD.UK | 0117 9381800
Safety Information
Please read this information BEFORE installing the equipment.
Intended Users
This manual is to be made available to all persons who are required to install, configure or service equipment
described herein, or any other associated operation.
The information given is intended to highlight safety issues, and to enable the user to obtain maximum benefit from
the equipment.
Application Area
The equipment described is intended for industrial motor speed control using DC or AC motor controllers, with DC
motors AC induction or AC synchronous machines.
Personnel
Qualified personnel should carry out installation, operation and maintenance of the equipment. A qualified person is
someone who is technically competent and familiar with all safety information and established safety practices; with
the installation process, operation and maintenance of this equipment; and with all the hazards involved.
REFER TO YOUR MAIN PRODUCT MANUAL FOR SPECIFIC SAFETY INFORMATION ABOUT THE
It is required that the users have DSD, RSLogix 5000 and RS Networx for ControlNet installed
on a computer and have a working knowledge of these software packages.
RSLogix 5000, ControlLogix500, and RSNetworx for ControlNet are registered trademarks of Allen-Bradley Inc.
ControlNet Communications Interface - HA470733U001
DEVICE YOU ARE CONTROLLING
ACKNOWLEDGEMENTS
Drive System Designer, DSD is a registered trademark of Parker SSD Drives Inc.
IMPORTANT
!
Advertisement
Table of Contents
