Shop Iron 41199 User Manual

Shop Iron 41199 User Manual

30 amp plasma cutter

Advertisement

ONE YEAR LIMITED WARRANTY
Star Asia-USA, LLC (hereinafter "seller") warrants to the original purchaser only, that this product will be free from defects in
material or workmanship for a period of one year from date of purchase.
Warranty Performance
Warranty coverage is conditioned upon purchaser furnishing seller or its authorized service center with adequate written
proof of the original purchase date. Products returned, freight prepaid and insured, to our factory or to an Authorized Service
Center will be inspected and repaired or replaced, at seller's option, free of charge if found to be defective and subject to
warranty. Defective parts not subject to normal wear and tear will be repaired or replaced, at our option during the above
stated warranty periods. In any event, reimbursement is limited to the purchase price paid. Other than the postage and
insurance requirement, no charge will be made for repairs or replacements covered by this warranty. Under no circumstances
shall the manufacturer bear any responsibility for loss of the unit, loss of time or rental, inconvenience, commercial loss or
consequential damages. There are no warranties which extend beyond the description of the face hereof.
Exclusions
This warranty does not cover parts damaged due to normal wear, abnormal conditions, misapplication, misuse, abuse,
accidents, operation at other than recommended pressures or temperatures, improper storage or freight damage. Parts
damaged or worn by operation in dusty environments are not warranted. Failure to follow recommended operating and
maintenance procedures also voids warranty.
Additional items not covered under this warranty: product failure caused by rain, excessive humidity, corrosive environments
or other contaminants; cosmetic defects that do not interfere with product's functionality.
This warranty shall not apply when: the product has been used for commercial or rental purposes; defects in materials
or workmanship or damages result from repairs or alterations which have been made or attempted by others or the
unauthorized use of nonconforming parts; this damage is due to abuse, improper maintenance, neglect or accident; or the
damage is due to use of the product after partial failure or use with improper accessories.
Seller will not be liable for: labor charges, loss or damage resulting from improper operation, maintenance or repairs made by
persons other than a Star Asia-USA, LLC Authorized Service Center.
The use of other than genuine Star Asia-USA, LLC Repair Parts will void warranty.
Warranty Disclaimers
NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS
PRODUCT, ANY IMPLIED WARRANTIES OF SELLER REGARDING THIS PRODUCT INCLUDING BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED.
BUYER'S OR USER'S REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. STAR ASIA-USA, LLC
SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. IN NO
EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR
OTHERWISE, SHALL SELLER'S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN RISE TO THE
CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE
EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE.
Limitations on Warranty Disclaimers
Any implied warranties shall be limited in duration to one year from the date of purchase. In some states of the U.S.A. and
in some provinces of Canada there is no limitation for how long an implied warranty is valid, so the aforementioned limitation
may not apply to you.
In no event shall seller be liable for any incidental or consequential damages (including but not limited to liability for loss
exclusion or limitation of incidental or consequential damages is not allowed, so the aformentioned limitation or exclusion
may not apply to you.
U.S.A., Canada and the Commonwealth of Puerto Rico. For warranty coverage within other countries, contact your local Star
Asia-USA, LLC dealer or importer.
Distributed by Star Asia-USA, LLC
P.O. Box 58399, Renton, WA 98058
Consumer Service: 800-386-0191
e-mail: info@titan-us.com
©2016 Star Asia-USA, LLC
BUILT TO GET THE JOB DONE
30 Amp Plasma Cutter
# 41199
Please read and understand this instruction manual carefully before the installation and
operation of this equipment.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 41199 and is the answer not in the manual?

Questions and answers

Summary of Contents for Shop Iron 41199

  • Page 1 There are no warranties which extend beyond the description of the face hereof. # 41199 Exclusions This warranty does not cover parts damaged due to normal wear, abnormal conditions, misapplication, misuse, abuse, accidents, operation at other than recommended pressures or temperatures, improper storage or freight damage.
  • Page 2 NOTES BUILT TO GET THE JOB DONE CONTENTS PAGE Introduction / Safety - Cautions Air Plasma Cutting Technology Technical Data, Features and Speci cations Set Up and Operating Procedure Plasma Cutting Procedure & Techniques 10-12 Replacement Parts Notes Warranty...
  • Page 3: Replacement Parts

    (NOT USED WITH EXTENDED PLRWPR0110 ELECTRODES OR NOZZLES) PLRWPD1039 SHOP IRON Plasma Cutting Machines are manufactured and compliant with - CAN/CSA E60974-1 & PLRWPR106 ANSI/IEC 60974-1, guaranteeing you electrical safety and performance. California Proposition 65 WARNING: This product contains or produces a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm) (California Health and Safety Code Section 25249.5 et seq.)
  • Page 4 SAFETY (Continued) Electric shock: It can kill. Touching live electrical parts can cause fatal shocks or severe burns. The BUILT TO GET THE JOB DONE plasma nozzle and work circuit is electrically live whenever the output is on. The input power circuit and internal machine circuits are also live when power is on. Do not touch live electrical parts or electrodes with bare skin, gloves or wet clothing.
  • Page 5 Air pressure, ow rate and air quality are critical to quality plasma cutting and consumable life span. properly prepared according to the required Safety Standards to The required air pressure and volume can vary from model to model and the manufacturer will provide the specs. The Shop Iron plasma cutting machine air pressure is...
  • Page 6: Maintenance

    CAUTION 1. Working Environment. BUILT TO GET THE JOB DONE 1.1 The environment in which this welding equipment is installed must be free of grinding dust, corrosive ials etc, and at no more than maximum of 80% humidity. 1.2 When using the machine outdoors protect the machine from direct sun light, rain water and snow etc; the temperature of working environment should be maintained within -14°F to +104°F..
  • Page 7: Air Plasma Cutting Technology

    AIR PLASMA CUTTING TECHNOLOGY Plasma cutters work by passing an electric arc through a gas that is passing through a constricted opening. The gas can be air, ni- trogen, argon, oxygen. etc. The electric arc elevates the temperature of the gas to the point that it enters a 4th state of matter. We BUILT TO GET THE JOB DONE part of the circuit, the electrical conductivity of the plasma causes the arc to transfer to the work.
  • Page 8: Features And Specifications

    BUILT TO GET THE JOB DONE BUILT TO GET THE JOB DONE FEATURES AND SPECIFICATIONS FEATURES AND SPECIFICATIONS (continued) FEATURES TECHNICAL DATA • POWERFUL AND RELIABLE IGBT INVERTER Power Supply / Phases (V-Ph) 115/230V - 1 +/- 15% TECHNOLOGY DELIVERS 30 AMPS AT A 35% DUTY CYCLE Rated input Power (KVA) 5.5-230V...

Table of Contents