FIA TR47-23 Installation Instructions Manual

If you have any comments or concerns,
please feel free to contact our
customer service department at:
Toll-free: 1-800-835-0438
OR
Email: info@gofia.com
Thank you for purchasing one of our fine quality products. Your seat cover is engineered from high quality materials and designed
with precision to give you a long-lasting, well-adjusted fit.
INSTRUCTIONS:
1) TR49-8, OE39-8, SP89-8 ONLY - Remove head
rest (see note)
2) Open velcro on the side seam to allow for fitting
around armrest
3) Slip cover over backrest and pull down firmly
4) Fasten side velcro
1) Center cushion cover on seat
2) Pass the front strap under the seat and buckle to
the back flap of cover
3) TR49-8, OE39-8, SP39-8, TR47-23, OE37-23,
SP87-23, TR47-27, OE37-27, SP87-27:

NOTES:

1) SELF-LOCKING SUPER-GRIP® BUCKLE :

2) HEAD REST REMOVAL:

A) - Insert paper clip into holes at base to
release
- Lift off
OR
B) - Push in side release buttons
- Lift off
(If unable to remove consult dealership)
WARNING: NEVER INSTALL SEAT COVERS ON SEATS WITH BUILT-IN AIRBAGS AS THIS MAY INTERFERE WITH THE
PROPER DEPLOYMENT OF THE AIR BAGS WHICH COULD RESULT IN SERIOUS INJURY.
Fia Inc. Winnipeg, Canada R3L 0N3 Telephone (204) 475-0515 Toll-Free: 1-800-835-0438
SEAT COVERS
BY
FEATURING
SUPER-GRIP®
THE SLIP RESISTANT FASTENING SYSTEM
INSTALLATION INSTRUCTIONS
FOR
TR47-23, TR47-27, TR48-24, TR49-8
OE37-23, OE37-27, OE38-24, OE39-8
SL67-23, SL67-27, SL68-24, SL69-8
SP87-23, SP87-27, SP88-24, SP89-8
A) BACKREST COVER
5) Tuck flaps through crevice and attached to velcro at
back
6) Adjust all velcro to equalize tension
7) Replace headrests (see note)
B) CUSHION COVER
Pass side straps through the opening between the
molded plastic and the seat and buckle to back flap
of cover
4) Adjust straps and buckles to equalize tension
3) RE-INSTALLATION OF HEADRESTS
A) Ensure pre-cut holes in seat cover align with holes
B) Replace headrests
in base.