Features And Functions; Preparation For Use - Hollywog WiTouch Pro User Manual

Contents
Not shown: User manual.
WiTouch Pro device (1)

Features and Functions

1. Electrode Area: Surface where the gel pads are placed
2. On/Off Button: Press to turn the device On/Off
3. Start/Stop Button: Press to start or stop treatment
4. +/- Buttons: Press to increase or decrease stimulation intensity

Preparation for Use

Before using your WiTouch Pro you will need to sync the remote control, apply the gel pads
to the device, and prepare the device for a treatment.
Applying the Gel Pads to the WiTouch Pro Device
The gel pads are intended for single person use. They will last, depending on skin type, oils,
and pH levels, approximately two to five applications. Replace the gel pads when they no
longer adhere completely. Follow these steps to apply the gel pads:
1. Separate two gel pads.
2. Remove the blue liner from the side
being applied to the electrode area. Do
not remove the green protective liner.
3. Align the shape of the first gel pad with
the electrode area. Apply the gel pad
onto the electrode area and firmly
press across the entire surface to
ensure good adhesion.
4. Repeat steps 1 – 3 for the second
gel pad.
Skin Preparation
• Trim, not shave, excessive hair on
the treatment area.
• Wash the skin and dry completely.
#0 Phillips head screwdriver (1)
1
Remote control with
(1) CR2032 battery
(comes installed)
2
4
1
AAA alkaline batteries (2)
Gel pads (1 pack)
3
2
3
4