Hollywog WiTouch Pro Quick Start Manual

Quick Start Guide
Smartphone not required for operation
INSTRUCTIONS MUST BE FOLLOWED. PLEASE DO NOT DISCARD.
For SETUP &

PAIRING INSTRUCTIONS

Scan QR code with camera on smartphone
or visit hollywog.com/setup
Download, install, & connect the WiTouch Pro App
App is ONLY compatible with iOS 9.0 & above OR ANDROID 4.4 & above.
Download the WiTouch Pro App.
Location must be ALLOWED.*
2
Using the screwdriver provided, remove the battery cover and
insert the AAA batteries.
3 Turn device ON by pressing the ON/OFF button. The green LED
will begin flashing, indicating the device is in standby mode.
4
Open your WiTouch Pro app.
5 Click "OK" for iOS or "ALLOW" for Android to enable Bluetooth.
6 Press & HOLD the
flashing and remains solid green. Let go of the buttons.
This should take approximately 3-4 seconds ONLY.
7
Click
8
Click "PAIR" for iOS device. Click "OK" to pair for Android devices.
NOTE: If DEVICE NOT FOUND repeat steps 6-8.

Smartphone Pairing

1
WiTouch Pro can only be paired with one (1) smartphone at a time, or pairing will be lost.
2
IF YOUR DEVICE WILL STILL NOT PAIR...
and MINUS (-) buttons for approximately 10 seconds (hold past the solid green). After
approximately 10 seconds your LED will blink Yellow. Let go of the buttons. Bluetooth is now
ON and ready to be paired (Refer to steps 6-8 above to follow pairing directions). If you see
a green flash instead of yellow, REPEAT the approximate 10-second hold. The Yellow blink
indicates Bluetooth is ON and ready to be paired.
3
Refer to Page 5 in the User Manual at hollywog.com/contact or call (423) 305-7777.
& intensity buttons at the same time until the LED stops
at the bottom of your screen.
FLIP ME OVER!
IMPORTANT!
Indications, Contraindications, Warnings, Precautions,
Adverse Reactions, and directions. A detailed user
manual with instructions for use is available in the
WiTouch Pro App's information tab and for download
at hollywog.com/contact. A printed copy of the user
manual can be requested by contacting Hollywog at
info@hollywog.com.

Box Contents

WiTouch Pro Bluetooth
® ®
ensure Bluetooth is ON, hold both PLUS (+)
Refer to the user manual for all
Gel pads (1 pack of 3 pair)
device (1)
#0 Phillips head
screwdriver (1)
must be turned on in your
smartphone settings to pair.
AAA alkaline
batteries (2)