Table of Contents
Advertisement
7
Features
Standard features
Indicators and displays
The CDMA Module does not have any visible indicators or displays.
Audible indicators
The CDMA Module does not have any audible indicators.
Volume controls
The Module takes serial port input commands for volume controls and uses these
to set the gain factor in the codec stream. This allows you to control the audio
volume without having to build an external volume control interface.
Power on/off
The Module has a power on/off sequence to ensure that the system has been
shut down properly. Refer to the Kyocera 200 Module User's Guide,
82-B7908-1, for details.
Call processing features
The Module supports the following features with support packets in the serial
interface. The customer is responsible for implementing the displays or actions
taken from these features.
Indicators and display support features
Incoming call
l
Call dropped alert
l
"Missed call" indicator
l
Audible indicators
The Module supports the following indicators. Where possible, these are output
on the audio output.
Service warning-dropped call
l
Low voltage warning
l
Voice mail alert
l
Kyocera Proprietary
Kyocera 200 Module Data Book
37
Advertisement
Table of Contents
