Trio Datacom EB450 Quick Start Manual

Hide thumbs Also See for EB450:

Advertisement

Quick Links

Quic
Quic
Quic k Star
Quic
Quic
EB450 Base Sta
EB450 Base Sta
EB450 Base Sta
EB450 Base Sta tion
EB450 Base Sta
1.0 Introduction
Welcome to the Quick Start Guide for the EB450 Base /
Repeater Data Radio. This guide provides step-by-step
instructions, with simple explanations to get you up-and-
running. For further information, please refer to the E
Series User Manual.
Contents
1.0 Introduction............................................................ 1
4.0 Communications Ports........................................... 4
5.0 Power Supply Requirements..................................5
6.0 TVIEW+ Management Suite...................................7
7.0 Optimising the Antenna for VSWR......................... 6
8.0 LED Indicators and Test Outputs........................... 6
9.0 Bar Graph Indicators.............................................. 7
10.0 Support Options..................................................... 8
Quick Start Guide - EB450 Base Station
k Star
k Star
t Guide
t Guide
k Star t Guide
t Guide
k Star
t Guide
Related Products and Documentation
Remote Data Radio ER450
Hot Standby Base Station EH450
Digital Order Wire Voice Module EDOVM
Duplexers
TVIEW+ Management Suite
E Series User Manual
tion
tion
tion
tion
Fig 1
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EB450 and is the answer not in the manual?

Questions and answers

Summary of Contents for Trio Datacom EB450

  • Page 1: Table Of Contents

    EB450 Base Sta tion tion 1.0 Introduction Welcome to the Quick Start Guide for the EB450 Base / Repeater Data Radio. This guide provides step-by-step instructions, with simple explanations to get you up-and- running. For further information, please refer to the E Series User Manual.
  • Page 2: Mounting And Environmental Considerations

    The EB450 is designed for continuous full duplex transmission. An automatic thermostatically controlled fan The EB450 Base Station is housed in a 2RU 19” rack will operate whenever the internal temperature exceeds enclosure. The 4 mounting holes on the front panel 50 degrees Celsius.
  • Page 3: Connecting Antennas And Rf Feeders

    Not used accordance with the manufacturers notes. Pin 4 Shutdown Pin 5 Not used The RF connectors used on the EB450 radio are N Type Pin 6 Not used female connectors. Always use good quality low loss Pin 7 Ground...
  • Page 4 Caution: When the radio is configured to transmit • continuously, ensure an RF load is present BEFORE the radio modem can be configured to transmit applying power to the unit. continuously whenever powered, or Quick Start Guide - EB450 Base Station...
  • Page 5: Tview+ Management Suite

    6.0 TVIEW+ Management Suite - (fusing) Radio Configuration The EB450 radio modem is designed and calibrated to This TVIEW+ Management Suite allows a number of operate from a 13.8Vdc regulated supply, but will operate features including: Configuration (Local - serial, or from 11-16 volts (filtered) DC.
  • Page 6: Optimising The Antenna For Vswr

    An RTS loop as described in Section 4.4, or b) A system port PTT plug as described in Section 4.1 Refer to the User Manual for further details of VSWR testing. LED Legend Quick Start Guide - EB450 Base Station...
  • Page 7: Bar Graph Indicators

    Display ON / OFF button. The display will normal operation). To activate this mode, simply depress turn off automatically after 5 minutes. the ON / OFF button while applying power to the unit. Quick Start Guide - EB450 Base Station...
  • Page 8: Support Options

    T +613 9775 0505 F +613 9775 0606 E support@trio.com.au www.trio.com.au Innovative and sophisticated digital communications Issue 3: May 2003 designs products and solutions Information subject to change without notice. © Copyright 2002 Trio DataCom Pty Ltd. All rights reserved.

Table of Contents