Advertisement
Figure 2.
You should get a window that looks like figure 3.
Step 3: Open folder named "trig1" you should get a window that looks like figure 4.
Figure 4.
Delete this file
and replace it
with a new MP3.
. Step 4: You should see an MP3 file XXXXXX.MP3 if you have never changed the
trigger1 MP3 file then it will be named Trigger1.MP3.
This MP3 file needs to be deleted and replaced by the MP3 file you want to play when you
activate trigger1. The MP3 file name is not important only that there is one MP3 file in the
trig1 folder. Make sure you delete the old MP3!
The folder should look something like figure 5a.
NOTE the new MP3 file cannot be "Read only" to check this right click on the MP3 file and
scroll down and select Properties, you will get a window that looks like figure 5b. Make
sure the "Read Only" box has no tick in it.
The new MP3 is now installed on the card and the card can be removed from the PC
following windows safe card removal procedures. Make sure the A 1720A is OFF and
insert the SD card into the slot in the front; it will click when fully inserted. The A 1720A is
ready to go on Trigger1.
Repeat these steps for Trigger2 to Trigger8 if you need to.
Please note: that the ALERT and EVAC folders and the MP3 files inside these
folders should not be deleted or renamed in anyway this will cause the A 1720A to
stop responding.
Open
Removable Disk
Figure 3.
Trigger 1 folder
Figure 5a.
Figure 5b.
REDBACK
®
Advertisement
