Overview: Altronix eBridge4SK kit consists of eBridge100SPR and eBridge4SPT which are Coax to CAT5 Ethernet adapters/media converters that deliver data and power over coax cable . eBridge4SK enables fast 10/100 Base-T Ethernet digital communication . eBridge4SPT allows you to upgrade your existing infrastructure by replacing a single analog device with up to four (4) PoE/PoE+ devices .
Installation Instructions: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction . Wiring should be UL Listed and/or Recognized wire suitable for the application . eBridge100SPR and eBridge4SPT is not intended to be connected to outside plant leads and should be installed indoors within the protected premises .
Typical Application: Fig. 1 eBridge100SPR 56VDC Input Ethernet Switch CAT-5e NVR Network up to 100m Video Server (Head End Coax up to 300m Equipment) eBridge4SPT (Front View) Output 10/100 Base-T CAT-5e CAT-5e up to up to 100m 100m PoE/PoE+ PoE/PoE+ Cameras Cameras Maximum Length of Coax Type vs.
Altronix is not responsible for any typographical errors . 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www .altronix .com | e-mail: info@altronix .com | Lifetime Warranty | Made in U .S .A . MEMBER...
Need help?
Do you have a question about the eBridge4SK Series and is the answer not in the manual?
Questions and answers