Subscribe to Our Youtube Channel
Related Manuals for Lafayette Classic Collection Echelon
Summary of Contents for Lafayette Classic Collection Echelon
- Page 1 Aluminum Blinds Installation Instructions Echelon, Traditions & Integra Aluminum Blinds 2” Metro Aluminum Blinds BACK *Click on any page to return to the Table of Contents*...
- Page 2 Echelon™ , Traditions™ & Integra™ Aluminum Blinds Thank you for choosing Lafayette aluminum blinds. With proper installation and care, your new aluminum blinds will provide many years of beauty and performance. Fastener Mounting Surface Tools and Fasteners Needed Wood #6 Hex Head Power Drill, 1/4”...
- Page 3 Traditions Headrail: Installing the Headrail Check the headrail to be sure nothing is tangled. Be sure to keep the top slat from sliding into the brackets. On inside mounts if a valance is being used, see instruc- tions below before installing the headrail. •...
- Page 4 Optional Hold-Down Brackets Plastic Hold-Down Brackets • Attach the hold-down brackets to the jamb, sill or outside mounting surface. When the blind is fully lowered, the pin on the hold-down must align with the center of the bottom rail end caps. •...
-
Page 5: Child Safety
Raising and Lowering Blinds The slats must be in the horizontal (open) position before raising or lowering. An automatic locking device takes effect when the cords hang down vertically. • Pull the cords toward the middle and down slightly to open the lock. - Page 6 2” Metro™ Aluminum Blinds Thank you for choosing Lafayette aluminum blinds. With proper installation and care, your new aluminum blinds will provide many years of beauty and performance. Fastener Mounting Surface Tools and Fasteners Needed Power Drill, 1/4” Driver and drill bits...
- Page 7 Outside Mount A flat surface of at least 1 3/4” high is required for bracket attachment • Mark where the ends of the headrail will be located. • Either hold the headrail up to the mounting surface or measure the headrail and mark its length.
- Page 8 Install Slat Valance • Slat valances use a clear clip for installation. • Tilt the slat to insert the bottom into the bottom notch of the clip. • Snap the top of the slat into the top notch of the clip. Top Notch Install Monarch Valance Bottom Notch...
- Page 9 Rasing and Lowering Blinds The slats must be in the horizontal (open) position before raising or lowering. An automatic locking device takes effect when the cords hang down vertically. • Pull the cords toward the middle and down slightly to open the lock.
Need help?
Do you have a question about the Classic Collection Echelon and is the answer not in the manual?
Questions and answers