Installation Instructions; Important Information; Guidelines On Safe And Efficient Use - Keller DCX Series Operating Instructions Manual

Installation instructions

Important information

KELLER website
At www.keller-druck.com, you will find a software section where you can download
all KELLER's software programs free of charge. The site contains the latest software
versions together with datasheets and operating instructions for the corresponding
products.
Service and Support
For service and support, please contact your local dealer or contact us at www.keller-
druck.com

Guidelines on safe and efficient use

• Treat the product with care and keep it in a clean place that is free of dust.
• This product must only be used within the specified temperature range
(→ Product datasheet)
• Do not drop or throw the device
• Do not attempt to modify the device
• The sensor pressure diaphragm is sensitive to contact. Do not press the diaphragm in
by hand or damage it with sharp objects. Do not direct water jets at the diaphragm.
• Only use this device for non-flammable fluids with no explosion hazard. KELLER
offers a series of measurement equipment products suitable for use in areas with
explosion hazards (ATEX zones). For more information, please contact our sales
staff.
• Aggressive media may damage the product. Make sure that the materials in the product
are not attacked by the medium to be measured.
• With relative versions (VG), the end of the cable must be located in a dry environment
in order to prevent condensation forming. If the cable ends in a humid environment, it
is highly advisable to use moisture absorber cartridges.
 9 
keller-druck.com