Care And Maintenance; Troubleshooting - VTech Gadget the Learning Robot User Manual

CARD 3B: Robot Face
Let's design Gadget a new face! Turn the dials
to choose him different eyes or mouth. Or press
the card buttons to learn different emotions and
you will see the corresponding animations with
fun sounds.
CARE & MAINTENANCE
1. Keep your VTech
it with a slightly damp cloth. Never use solvents or abrasives.
2. Keep it out of direct sunlight and away from direct sources of heat.
3. Remove the batteries when not using it for an extended period of
time.
4. Avoid dropping it. Never try to dismantle it.
5. Always keep VTech

TROUBLESHOOTING

If for some reason the program/activity stops working or the unit can't
be turned on again, then please follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back ON. The unit will now be ready to play again.
5. If the unit does not work, replace with an entire set of new batteries.
If the problem persists, please call our Consumer Services Department
on 01235 546810 (from UK) or +44 1235 546810 (outside UK) and a
service representative will be happy to help you.
Gadget the Learning Robot clean by wiping
®
Gadget the Learning Robot away from water.
®
3B
12