Table of Contents
Advertisement
5.
USB 2.0 connectors (10-1 pin USB_E12; USB_1112)
These connectors are for the USB 2.0 ports. Connect the USB module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
This USB connector complies with USB 2.0 specification that supports up to 480 MBps
connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
6.
Thermal sensor connector (2-pin T_SENSOR)
This connector is for the thermistor cable that allows you to monitor the temperature of
your motherboard's critical components and connected devices.
1-16
Chapter 1: Product Introduction
Hide quick links:
Advertisement
Table of Contents
