Wiring - QuietCool ES-1500 Owner's Manual

VERY IMPORTANT:
This is very important to system operation
NOTE: Local building codes and standards must be
adhered to in the installation of this unit.
AVOID BACK DRAFTS:
back drafting combustion appliances that are installed
in the conditioned space. It is strongly recommended
that combustion appliances NOT be installed in such a manner that they use room air for
combustion. Whole house fans are capable of pulling large quantities of air, from the home
and particularly if not enough windows are open. This could easily back draft gas appliances
located inside your home.

3. WIRING

NOTE: Wiring Diagrams are for examples only and wiring should be done by an experienced
electrician!
3.1. Single Speed Wiring
For wiring of the ES-1500, ES-2250, & ES-3100 with one speed
3.2. Two Speed Wiring
For wiring of the ES-4700 with two speeds.
3.3. Two Speed Wiring (ES-6400)
For wiring of the ES-6400 double motorhead whole house fan with two
speeds.
NOTE: The QuietCool whole house fans can be used with the included power cord with a
plug outlet, but will only operate on high speed. The system will also work with a wireless
system using the power cord.
6
Make sure the fan blade spins freely.
Care should be taken to avoid
QUIETCOOLSYSTEMS.COM