Motormate SDC-1120 Instruction Manual

DC-DC Isolated
4-step
Booster Charger
SDC-1120 ‧ SDC-2210
SDC-1130 ‧ SDC-2215
SDC-1140 ‧ SDC-2220

INSTRUCTION MANUAL

Please read this instruction manual carefully
before operating the device.
Specification
MODEL
Input Voltage
Bulk / Absorption Charging
Float Charging
Power Supply
Max. DC output current
Efficiency up to
Output short circuit
Battery reverse polarity
Input to output fully isolated.
Isolated output terminals
Operation temperature
Ventilation
Weight (kg)
Dimensions (mm)
MODEL
Input Voltage
Bulk / Absorption Charging
Float Charging
Power Supply
Max. DC output current
Efficiency up to
Output short circuit
Battery reverse polarity
Input to output fully isolated.
Isolated output terminals
Operation temperature
Ventilation
Weight (kg)
Dimensions (mm)
Specifications subject to change without notice.
SDC-1120 SDC-1130
12VDC (8 ~ 16VDC operative)
14.2V / 14.6V / 14.8V
13.2V / 13.5V / 13.8V
13.2V / 13.5V / 13.8V
20A 30A
90%
Yes
DC fuse
Yes
1 1
0°C to 40°C
Cooling Fan, thermal controlled
1.4 1.9
184 x 115 x 70 250 x 115 x 70
SDC-2210 SDC-2215
24VDC (10 ~ 32VDC operative)
28.4V / 29.2V / 29.6V
26.4V / 27.0V / 27.6V
26.4V / 27.0V / 27.6V
10A 15A
90%
Yes
DC fuse
Yes
1 1
0°C to 40°C
Cooling Fan, thermal controlled
1.4 1.9
184 x 115 x 70 250 x 115 x 70
Thank you for purchasing the DC-DC 4 step booster
charger.
Please read this instruction manual carefully before
operating the device. Keep this manual in a safe place for
future reference. This instruction manual is part of the
product. It must be handed over along with the device if it
is passed on to a third party.
Do not open the device if it has been connected to the
battery or DC power source.
Warranty only covers the cost of parts and labor for
the repair service within the warranty period. Warranty will
not apply where the device has been misused, altered,
neglected, improperly installed, or physically damaged,
either internally or externally or damaged from improper
use or use in an unsuitable environment. We shall not be
liable for damages, whether direct, incidental, special, or
consequential, or economic loss even though caused by
negligence, or other fault. If the device requires warranty
service, please return it to the place of purchase along
with a copy of the receipt with purchasing date.
SDC-1140
40A
Output
Terminals
1
2.2
280 x 115 x 70
SDC-2220
Output
Voltage
Setting
20A
1
2.2
280 x 115 x 70

Important Information!

WARNING! Risk of Electric Shock!

Front View

Power On/Off
Switch
Charging
Status
Indicators
This device has been CE tested and
conforms to the applicable directives and
standards.
Disposal
When the device has become unusable, dispose of
it in accordance with the applicable disposal
regulations.
External
Control
Wire
DC Input Cables